Announcement

Collapse
No announcement yet.

Internal Thermometer Tips

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Internal Thermometer Tips

    1. Don't leave the long stem thermometer in the HOTBIN (the display will either steam up like mine below or you'll bury it under a mountain of decaying waste).

    2. When taking a temperature reading only insert the long stem 10 to 15cm (4 to 6 inches) to make sure you are only taking a temperature reading from the very top layer where things are hottest.
    thermometerover50.jpgaftergrass.jpg
    Last edited by WiseOldBloak; 08-24-2015, 01:01 PM.

  • #2
    Could yours be faulty? Mine doesn't steam up and I leave it in all the time

    Comment


    • #3
      Me too, mines been in for 2 years and never steamed up? But maybe that's because my Hotbin has never reached the advertised 40C-60C Haha.

      Comment


      • #4
        The thermometer in my lid has moisture in it but the long stem one is fine. I suspect the seal has a leak. I have had my bin since December 2011.

        Comment

        Working...
        X