Good morning so I went from a compacted base layer which was not letting sit through to now struggling to get my HotBin to run bellow 60 degrees Celsius. I had taken the lower part of the base layer out added bulking agent and paper / cardboard and mixed in. I also used a bamboo pole to push down to create chimneys to pull the air back through from the base. I then added a first lawn cut and now it is all Cooking away between 65 and 75 degrees Celsius for over a week. Is this okay or is it just killing off all the bacteria? I have fully opened the top vent but that has not reduced the temperature as advised by HotBin. Many thanks
Announcement
Collapse
No announcement yet.
Running too hot
Collapse
X
-
Originally posted by Michael1138 View PostGood morning so I went from a compacted base layer which was not letting sit through to now struggling to get my HotBin to run bellow 60 degrees Celsius. I had taken the lower part of the base layer out added bulking agent and paper / cardboard and mixed in. I also used a bamboo pole to push down to create chimneys to pull the air back through from the base. I then added a first lawn cut and now it is all Cooking away between 65 and 75 degrees Celsius for over a week. Is this okay or is it just killing off all the bacteria? I have fully opened the top vent but that has not reduced the temperature as advised by HotBin. Many thanks
- Likes 1
Comment
-
I think they have either moved down to avoid the heat or they have hatched before there was enough leachate to drown them. I would think its more the heat. Another poster had the same issue with worm and worms don't like the heat. I managed to get 75 degrees the other day in my bin. I really didn't think it was possible to get that high, but it appears it is.
- Likes 2
Comment
Comment